Find the iRobot Roomba Robot Model Number
Editor: Feroz Sheikh · Updated · How we verify
Copy the full Roomba family and suffix, including Combo and +. A j7+, Combo j7+ and j9+ can use different filters, pads, batteries or Clean Base parts.
Where iRobot says the model number is
- Model number:
To find your Roomba model number, turn the robot over. The model number is printed near the left wheel, on the underside of the robot.
iRobot: How do I find the model number and series of Roomba robot vacuum? - Series:
Please refer to the first digit/letter of the model number to determine the robot's Series.
iRobot: How do I find the model number and series of Roomba robot vacuum? - Examples:
For example: Model 565 belongs to 500 Series, Model 980 belongs to 900 Series, Model i7 belongs to i Series.
iRobot: How do I find the model number and series of Roomba robot vacuum? - Serial number (separate from the model):
Your Roomba serial number can be located easily, simply by removing the bin. With the bin removed, just turn Roomba over and look at where the bin was located.
iRobot: Where Do I Find the Serial Number?
Look-alike names with separate part records
These catalog entries share most of their name but are recorded as different models. Copy the complete name and suffix from your label, then open the exact page; do not borrow a verdict from a neighbouring entry.
| Look-alike models | Catalog codes |
|---|---|
| Roomba Combo j7+, Roomba j7, Roomba j7+ | Combo j7+, j7, j7+ |
| Roomba Combo i5, Roomba i5 | Combo i5, i5 |
| Roomba Combo j9+, Roomba j9+ | Combo j9+, j9+ |
Copy the robot identity
Power the robot down by its manual before handling it. Read the product model on its label and compare it with the device details in its app. Keep the complete code and every suffix. A serial number identifies one individual unit, so keep it private; it is not the model to put in a public parts search.
Check the dock separately
A Plus or Ultra bundle can include a station with its own model number. A used robot may have been paired with another base. Copy the station label separately when checking a bag, station filter or charging accessory. The robot name alone cannot resolve a dock mismatch.
Keep generations apart
Treat the dock name and robot name as separate identifiers; a bag can fit the station without fitting every robot sold with a similar base.
Find the replacement item
A manufacturer item number identifies a specific original part or bundle. A descriptive component label without a published item number stays a catalog label. A retail barcode is a separate identity and should not be inferred from the robot code or seller title.
When the label is unclear
Use the manufacturer support route if the physical label and app disagree. For a correction photograph, crop to the relevant model or part text and obscure serial numbers, addresses and account details. Record which surface the label came from rather than substituting a similar model found in a search.
Browse exact iRobot Roomba models · All brand identification guides