Roomba i Series
Roomba i Series Error 14: Bin not detected
Quick answer
Error fourteen (14) means your i series robot is not detecting an installed Bin.
Editor: Feroz Sheikh · Updated · How we verify
Exact message and stated cause
| Where it appears | Message | Manufacturer's stated cause |
|---|---|---|
| i Series chart | Reinstall the bin, then press Clean | Bin not present in robot. Ensure filter is installed in bin. Check bin detect switch |
Check your model first
These instructions cover Roomba i Series (Roomba i1, Roomba i3, Roomba i4, Roomba i5, Roomba i6, Roomba i7, Roomba i8 in this catalog). Match the full model name and the complete message before continuing.
Manufacturer checks in order
- Confirm the filter is installed properly.
- Confirm the bin is installed properly.
- If the message persists after reinstalling the bin, please perform a robot reboot.
- If the message persists after the robot reboot, you may need a replacement bin.
Safety notes
Use the instructions for your exact robot and dock. Stop if the unit is wet, unusually hot, damaged or has a swollen battery. Contact the manufacturer; do not bypass sensors or open sealed electrical assemblies.
When to contact support
If you believe you're in warranty, please contact iRobot Customer Care.
Part usually involved
Only if the checks above fail. The manufacturer article, not this site, decides whether a part is needed.
Filter
- e/i/j High-Efficiency filter (4639161) is listed for Roomba i3, Roomba i4, Roomba i5, Roomba i7, Roomba i8, Roomba i1, Roomba i6.
Dust bin
VacPartFit has no sourced dust bin page for these models yet. Use the manufacturer's own ordering route and match the exact model first.
Before buying a part
No. An error code does not prove a part has failed or that a seller's replacement fits. Check the exact manufacturer identifier separately.
- Roomba i1 parts
- Roomba i3 parts
- Roomba i4 parts
- Roomba i5 parts
- Roomba i6 parts
- Roomba i7 parts
- Roomba i8 parts
Questions about this error
Which models does this guide cover?
These instructions cover Roomba i Series (Roomba i1, Roomba i3, Roomba i4, Roomba i5, Roomba i6, Roomba i7, Roomba i8 in this catalog). Match the full model name and the complete message before continuing.
Does this error prove I need to buy a replacement part?
No. An error code does not prove a part has failed or that a seller's replacement fits. Check the exact manufacturer identifier separately.
Official sources
This guide summarizes published manufacturer instructions. It does not claim a hands-on repair or physical fit test.